Armoires électriques chauffages anti-condensation

Armoires électriques chauffages anti-condensation

IP Armoires fournit une large gamme de produits de chauffage pour les boîtiers électriques. Des résistances anti-condensation sont nécessaires pour éviter les défaillances ou la corrosion causées par des températures basses ou une humidité élevée à l’intérieur de l’armoire. Cela se produit lorsque la température ambiante est basse et que l’équipement ne génère pas suffisamment de chaleur pour maintenir la température interne minimale. Les produits de chauffage IP Armoires sont fabriqués à la plus haute qualité en Europe.

Chaufferette compacte – H Range

Appareils de chauffage compacts avec empreinte minimale sur rail DIN.

IP-PTCHT Heater

IP-H75 – 75W Heater 140 x 59 x 61 (mm)

FeaturesUnitIP-H75
Heating Capacity*W75
Power supplyV110-250V AC or DC
Inrush currentA4
Delayed fuse (advised)A6.3
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm140x59x61
Weightkg0.34
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-PTCHT Heater

IP-H100 – 100W Heater 140 x 59 x 61 (mm)

FeaturesUnitIP-H100
Heating Capacity*W100
Power supplyV110-250V AC or DC
Inrush currentA5
Delayed fuse (advised)A8
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm140x59x61
Weightkg0.34
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-PTCHT Heater

IP-H150 – 150W Heater 220 x 59 x 61 (mm)

FeaturesUnitIP-H150
Heating Capacity*W150
Power supplyV110-250V AC or DC
Inrush currentA9.5
Delayed fuse (advised)A10
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm220x59x61
Weightkg0.57
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

Touch Safe Chauffage – TSH Range

Conception optimisée pour atteindre une température de surface inférieure et une efficacité de transfert de chaleur accrue.

IP-PTCSTHT Heater

IP-TSH25 – 25W Heater 125 x 41 x 41 (mm)

FeaturesUnitIP-TSH25
Heating Capacity*W25
Power supplyV110-250V AC or DC
Inrush currentA2.5
Delayed fuse (advised)A4
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm125x41x41
Weightkg0.16
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-PTCSTHT Heater

IP-TSH50 – 50W Heater 125 x 41 x 41 (mm)

FeaturesUnitIP-TSH50
Heating Capacity*W50
Power supplyV110-250V AC or DC
Inrush currentA3.5
Delayed fuse (advised)A4
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm125x41x41
Weightkg0.16
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-PTCSTHT Heater

IP-TSH75 – 75W Heater 140 x 63 x 70 (mm)

FeaturesUnitIP-TSH75
Heating Capacity*W75
Power supplyV110-250V AC or DC
Inrush currentA4
Delayed fuse (advised)A6.3
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm140x63x70
Weightkg0.39
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-PTCSTHT Heater

IP-TSH100 – 100W Heater 140 x 63 x 70 (mm)

FeaturesUnitIP-TSH100
Heating Capacity*W100
Power supplyV110-250V AC or DC
Inrush currentA5
Delayed fuse (advised)A8
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm140x63x70
Weightkg0.39
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-PTCSTHT Heater

IP-TSH150 – 150W Heater 220 x 63 x 70 (mm)

FeaturesUnitIP-TSH150
Heating Capacity*W150
Power supplyV110-250V AC or DC
Inrush currentA9.5
Delayed fuse (advised)A10
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm220x63x70
Weightkg0.66
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

Ventilateur assisté par ventilateur – FH Range

Ventilateur assisté, résistances chauffantes.

IP-Fan-Heater

IP-FH250 – 250W Heater 135 x 112 x 82 (mm)

FeaturesUnitIP-FH250
Heating CapacityW250
Power supplyV/Hz230/50-60
Max. currentA1.2
Heating element typeResistor
Thermal protectionThermal cut out fuse in case of fan failure
RadiatorExtruded aluminium profile; anodized
Axial fanBall bearing; service life 50.000 hrs at 25°C (77°F) air flow rate 35 m³/h; free flow
SignallingGreen LED power ON
Electrical connections3 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass I earthed
Protection degree EN60529IP20
Operating temperature°C (°F)-25/+70 (-13/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest performance with vertical installation
Dimensions HxWxDmm135x112x82
Weight (with packaging)kg0.88(0.94)
ConformityCE – UL cruus

 

IP-Fan-Heater

IP-FH400 – 400W Heater 165 x 112 x 82 (mm)

FeaturesUnitIP-FH400
Heating CapacityW400
Power supplyV/Hz230/50-60
Max. currentA1.9
Heating element typeResistor
Thermal protectionThermal cut out fuse in case of fan failure
RadiatorExtruded aluminium profile; anodized
Axial fanBall bearing service life 50.000 hrs at 25°C (77°F) air flow rate 35 m³/h free flow
SignallingGreen LED power ON
Electrical connections3 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass I earthed
Protection degree EN60529IP20
Operating temperature°C (°F)-25/+70 (-13/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest performance with vertical installation
Dimensions HxWxDmm165x112x82
Weight (with packaging)kg0.97(1.04)
ConformityCE – UL cruus

 

IP-Fan-Heater

IP-FH500 – 500W Heater 165 x 112 x 82 (mm)

FeaturesUnitIP-FH500
Heating CapacityW500
Power supplyV/Hz230/50-60
Max. currentA2.4
Heating element typeResistor
Thermal protectionThermal cut out fuse in case of fan failure
RadiatorExtruded aluminium profile anodized
Axial fanBall bearing service life 50.000 hrs at 25°C (77°F) air flow rate 35 m³/h free flow
SignallingGreen LED power ON
Electrical connections3 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass I; earthed
Protection degree EN60529IP20
Operating temperature°C (°F)-25/+70 (-13/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest performance with vertical installation
Dimensions HxWxDmm165x112x82
Weight (with packaging)kg0.97(1.04)
ConformityCE – UL cruus

 

IP-Fan-Heater

IP-FH750 – 750W Heater 225 x 112 x 82 (mm)

FeaturesUnitIP-FH750
Heating CapacityW750
Power supplyV/Hz230/50-60
Max. currentA3.6
Heating element typeResistor
Thermal protectionThermal cut out fuse in case of fan failure
RadiatorExtruded aluminium profile; anodized
Axial fanBall bearing service life 50.000 hrs at 25°C (77°F) air flow rate 44 m³/h free flow
SignallingGreen LED power ON
Electrical connections3 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass I; earthed
Protection degree EN60529IP20
Operating temperature°C (°F)-25/+70 (-13/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest performance with vertical installation
Dimensions HxWxDmm225x112x82
Weight (with packaging)kg1.35(1.42)
ConformityCE – UL cruus

 

Demande de prix

14 + 11 =