Electrical Enclosure Heaters

Electrical Enclosure Anti-condensation Heaters

IP Enclosures provide a wide range of heating products for electrical enclosures. Anti-condensation heaters are required to prevent failures or corrosion caused by low temperatures or high humidity inside the enclosure. This occurs when ambient temperature is low and the equipment does not generate enough heat to maintain the minimum internal temperature. IP Enclosures heating products are manufactured to the highest quality in Italy.

Heating CapacityDescriptionDimensionsOrdering InformationDownload
Watts(mm)SKUData Sheet
Compact Heaters
75W75W Compact Heater140 x 59 x 61IP-H75PDF
100W100W Compact Heater140 x 59 x 61IP-H100PDF
150W150W Compact Heater 220 x 59 x 61IP-H150PDF
Heaters with Touch Shield
25W25W Heater with Touch Shield125 x 41 x 41IP-TSH25PDF
50W50W Heater with Touch Shield125 x 41 x 41IP-TSH50PDF
75W75W Heater with Touch Shield140 x 63 x 70IP-TSH75PDF
100W100W Heater with Touch Shield140 x 63 x 70IP-TSH100PDF
150W150W Heater with Touch Shield220 x 63 x 70IP-TSH150PDF
Fan-Assisted Heaters
250W250W Fan-Assisted Heater135 x 112 x 82IP-FH250PDF
400W400W Fan-Assisted Heater165 x 112 x 82IP-FH400PDF
500W500W Fan-Assisted Heater165 x 112 x 82IP-FH500PDF
750W750W Fan-Assisted Heater225 x 112 x 82IP-FH750PDF

Compact Heater – H Range

Compact heaters with minimum DIN rail foot-print.

IP-H75 Electrical Enclosure Heater

IP-H75 – 75W Heater 140 x 59 x 61 (mm)

FeaturesUnitIP-H75
Heating Capacity*W75
Power supplyV110-250V AC or DC
Inrush currentA4
Delayed fuse (advised)A6.3
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm140x59x61
Weightkg0.34
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-H100 Electrical Enclosure Heater

IP-H100 – 100W Heater 140 x 59 x 61 (mm)

FeaturesUnitIP-H100
Heating Capacity*W100
Power supplyV110-250V AC or DC
Inrush currentA5
Delayed fuse (advised)A8
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm140x59x61
Weightkg0.34
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-H150 Electrical Enclosure Heater

IP-H150 – 150W Heater 220 x 59 x 61 (mm)

FeaturesUnitIP-H150
Heating Capacity*W150
Power supplyV110-250V AC or DC
Inrush currentA9.5
Delayed fuse (advised)A10
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm220x59x61
Weightkg0.57
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

Touch Safe Heater – TSH Range

Optimised design to achieve lower surface temperature and increased heat transfer efficiency.

IP-TSH25 Electrical Enclosure Heater

IP-TSH25 – 25W Heater 125 x 41 x 41 (mm)

FeaturesUnitIP-TSH25
Heating Capacity*W25
Power supplyV110-250V AC or DC
Inrush currentA2.5
Delayed fuse (advised)A4
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm125x41x41
Weightkg0.16
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-TSH50 Electrical Enclosure Heater

IP-TSH50 – 50W Heater 125 x 41 x 41 (mm)

FeaturesUnitIP-TSH50
Heating Capacity*W50
Power supplyV110-250V AC or DC
Inrush currentA3.5
Delayed fuse (advised)A4
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm125x41x41
Weightkg0.16
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-TSH75 Electrical Enclosure Heater

IP-TSH75 – 75W Heater 140 x 63 x 70 (mm)

FeaturesUnitIP-TSH75
Heating Capacity*W75
Power supplyV110-250V AC or DC
Inrush currentA4
Delayed fuse (advised)A6.3
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm140x63x70
Weightkg0.39
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-TSH100 Electrical Enclosure Heater

IP-TSH100 – 100W Heater 140 x 63 x 70 (mm)

FeaturesUnitIP-TSH100
Heating Capacity*W100
Power supplyV110-250V AC or DC
Inrush currentA5
Delayed fuse (advised)A8
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm140x63x70
Weightkg0.39
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

IP-TSH150 Electrical Enclosure Heater

IP-TSH150 – 150W Heater 220 x 63 x 70 (mm)

FeaturesUnitIP-TSH150
Heating Capacity*W150
Power supplyV110-250V AC or DC
Inrush currentA9.5
Delayed fuse (advised)A10
Heating element typePTC resistor self regulating
Electrical connections2 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass II
Protection degree EN60529IP20
Operating temperature°C (°F)-45/+70 (-49/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
RadiatorExtruded aluminium profile with plastic cover
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest efficiency in vertical position
Dimensions HxWxDmm220x63x70
Weightkg0.66
ConformityCE – UL cruus
*at 20°C (68°F) ambient temperature

 

Fan Assisted Heater – FH Range

Fan assisted, resistor heaters.

IP-FH250 Electrical Enclosure Heater

IP-FH250 – 250W Heater 135 x 112 x 82 (mm)

FeaturesUnitIP-FH250
Heating CapacityW250
Power supplyV/Hz230/50-60
Max. currentA1.2
Heating element typeResistor
Thermal protectionThermal cut out fuse in case of fan failure
RadiatorExtruded aluminium profile; anodized
Axial fanBall bearing; service life 50.000 hrs at 25°C (77°F) air flow rate 35 m³/h; free flow
SignallingGreen LED power ON
Electrical connections3 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass I earthed
Protection degree EN60529IP20
Operating temperature°C (°F)-25/+70 (-13/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest performance with vertical installation
Dimensions HxWxDmm135x112x82
Weight (with packaging)kg0.88(0.94)
ConformityCE – UL cruus

 

IP-FH400 Electrical Enclosure Heater

IP-FH400 – 400W Heater 165 x 112 x 82 (mm)

FeaturesUnitIP-FH400
Heating CapacityW400
Power supplyV/Hz230/50-60
Max. currentA1.9
Heating element typeResistor
Thermal protectionThermal cut out fuse in case of fan failure
RadiatorExtruded aluminium profile; anodized
Axial fanBall bearing service life 50.000 hrs at 25°C (77°F) air flow rate 35 m³/h free flow
SignallingGreen LED power ON
Electrical connections3 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass I earthed
Protection degree EN60529IP20
Operating temperature°C (°F)-25/+70 (-13/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest performance with vertical installation
Dimensions HxWxDmm165x112x82
Weight (with packaging)kg0.97(1.04)
ConformityCE – UL cruus

 

IP-FH500 Electrical Enclosure Heater

IP-FH500 – 500W Heater 165 x 112 x 82 (mm)

FeaturesUnitIP-FH500
Heating CapacityW500
Power supplyV/Hz230/50-60
Max. currentA2.4
Heating element typeResistor
Thermal protectionThermal cut out fuse in case of fan failure
RadiatorExtruded aluminium profile anodized
Axial fanBall bearing service life 50.000 hrs at 25°C (77°F) air flow rate 35 m³/h free flow
SignallingGreen LED power ON
Electrical connections3 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass I; earthed
Protection degree EN60529IP20
Operating temperature°C (°F)-25/+70 (-13/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest performance with vertical installation
Dimensions HxWxDmm165x112x82
Weight (with packaging)kg0.97(1.04)
ConformityCE – UL cruus

 

IP-FH750 Electrical Enclosure Heater

IP-FH750 – 750W Heater 225 x 112 x 82 (mm)

FeaturesUnitIP-FH750
Heating CapacityW750
Power supplyV/Hz230/50-60
Max. currentA3.6
Heating element typeResistor
Thermal protectionThermal cut out fuse in case of fan failure
RadiatorExtruded aluminium profile; anodized
Axial fanBall bearing service life 50.000 hrs at 25°C (77°F) air flow rate 44 m³/h free flow
SignallingGreen LED power ON
Electrical connections3 screw terminals for stranded or rigid wire 2.5 mm²
Protection class IECClass I; earthed
Protection degree EN60529IP20
Operating temperature°C (°F)-25/+70 (-13/+158)
Storage temperature°C (°F)-45/+80 (-49/+176)
MountingClip for mounting on DIN rail 35 mm EN50022
Installation positionBest performance with vertical installation
Dimensions HxWxDmm225x112x82
Weight (with packaging)kg1.35(1.42)
ConformityCE – UL cruus

 

Request Quote

4 + 1 =