Stainless Steel 30° Sloping Roof Enclosures

Why use a sloping roof enclosure?

Choose a sloping roof enclosure to prevent build-up of dust, debris and waste material. Stainless Steel 30° Sloping Roof Enclosures are designed to house a variety of electrical switch and control equipment while preventing build-up of dust, debris and waste material.

They are suitable for internal and external electrical installations for industrial, infrastructure, commercial, communications, defence, marine, food and beverage applications.

SINGLE DOOR, Stainles Steel IP66 Sloping Roof Enclosures – SSSR-1

The SSSR range of grade 316/316L stainless steel 30° sloping roof single door enclosures are designed for extreme duty applications.

Features & Specifications of Stainless Steel Sloping Roof Enclosures

Protection: Complies with IP66 IK10, NEMA 4x (Independent accredited test laboratory).

Standard: IEC62208, IEC/EN/AS60529, (UL 508A Optional).

Material:

– Enclosure Body: 1.5mm Grade 316/316L Stainless Steel
– Enclosure Gland Plate: 1.5mm Grade 316/316L Stainless Steel
– Enclosure Door: 1.5mm Grade 316/316L Stainless Steel
– Enclosure Seal: Polyurethane

Surface Finish:

0.4 micron Ra surface brushed finish

Enclosure Body:

The robust monoblock body with 30° sloping roof is fabricated using 1.5mm Grade 316/316L Stainless Steel. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment to ensure accuracy and consistent high quality. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. The roof consist of a 30° sloped roof design that protrudes past the seal, flush with the front of the door face. Integral device plate mounts and M6 earth stud is provided.

Enclosure Door:

The robust surface mounted door is fabricated using 1.5mm Grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains integral cable management rail studs, M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components.

Enclosure Seal:

A high quality machine-applied continuous foamed in place (FIP) Polyurethane seal provides excellent sealing over a long life.

Enclosure Lock:

A full range of locking solutions are available upon request. Standard locks are as follows:
– 8mm square drive quarter turn lock with key.

Device Mounting Plate:

The device mounting plate is fabricated using galvanised steel sheet, pressed to provide additional strength and supplied pre-fitted into enclosure as standard.

IP66 Sloping Roof Enclosure Sizes