Stainless Steel Enclosures

Stainless Steel Electrical Enclosures

IP Enclosures provide grade 316 stainless steel IP66 single door electrical enclosures and IP55 double door electrical enclosures.

IP66 Stainless Steel Enclosures

The SS1 range consists of grade 316 stainless steel, single door, wall-mounted electrical enclosures designed for extreme duty applications.

Features & Specifications

Protection: Complies with IP66 IK10, NEMA 4x (Independent accredited test laboratory).

Standard: IEC62208, IEC/EN60529, (UL 508A Optional).

Conforming and certified to IEC62208 – ‘Empty enclosures for low voltage switch gear and control gear assemblies’.

Material:

– Body: 1.5mm Grade 316/316L Stainless Steel
– Door: 1.5mm Grade 316/316L Stainless Steel
– Device Mounting Plate: 1.5mm Galvanised Steel Sheet
– Seal: Polyurethane

Surface Finish:

0.4 micron Ra surface brushed finish

Enclosure Body:

The robust monoblock body is 1.5mm Grade 316/316L Stainless Steel. Precision automated manufacturing equipment ensures accuracy and consistent high quality. Flat face sealing surfaces increase seal life. Pre-fitted blind nutserts for mounting brackets and accessories removes the need for drilling. This retains the integrity of the IP rating. Integral device plate mounts and M6 earth stud are included.

Enclosure Door:

The surface mounted door is 1.5mm Grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. Doors are also designed for a 110° opening. Each door contains integral cable management rail studs and an M6 earth stud. The cable management rails are removable to provide more space for control components.

Enclosure Seal:

A high quality full perimeter seal provides excellent sealing over a long life. It is machine applied Polyurethane foamed in place (FIP).

Enclosure Lock:

A full range of locking solutions are available upon request. Standard locks are as follows:
– 8mm square drive quarter turn lock with key.

Device Mounting Plate:

The device mounting plate is galvanised steel sheet. It is pressed to provide strength and is pre-fitted into the enclosure.

Incorporates many advanced features as standard inclusions

  • Fabricated using grade 316 stainless steel
  • Incorporates flat sealing face to improve seal life
  • Includes door cable rails
  • Includes ‘nutsert rivnuts’ for mounting brackets and accessories to retain IP rating
  • Includes mounting points for accessories including inner door escutcheons, rain hoods etc.

Quick Quote

10 + 8 =

Stainless Steel Electrical Enclosure
Stainless Steel Enclosure Open

IP66 Stainless Steel Enclosure Sizes

Part NumberEnclosure Size (mm)DownloadDownloadDownload
SKUH x W x DData SheetDrawing*.dwg
IP-SS302015300 x 200 x 150PDFPDF.dwg
IP-SS303015300 x 300 x 150PDFPDF.dwg
IP-SS403015400 x 300 x 150PDFPDF.dwg
IP-SS403020400 x 300 x 200PDFPDF.dwg
IP-SS404020400 x 400 x 200PDFPDF.dwg
IP-SS504020500 x 400 x 200PDFPDF.dwg
IP-SS504025500 x 400 x 250PDFPDF.dwg
IP-SS505025500 x 500 x 250PDFPDF.dwg
IP-SS604020600 x 400 x 200PDFPDF.dwg
IP-SS604025600 x 400 x 250PDFPDF.dwg
IP-SS606030600 x 600 x 300PDFPDF.dwg
IP-SS705025700 x 500 x 250PDFPDF.dwg
IP-SS806025800 x 600 x 250PDFPDF.dwg
IP-SS806030800 x 600 x 300PDFPDF.dwg
IP-SS808030800 x 800 x 300PDFPDF.dwg
IP-SS10060301000 x 600 x 300PDFPDF.dwg
IP-SS10080301000 x 800 x 300PDFPDF.dwg
IP-SS10080401000 x 800 x 400PDFPDF.dwg
IP-SS12080301200 x 800 x 300PDFPDF.dwg

Landscape Orientation

Part NumberEnclosure Size (mm)DownloadDownloadDownload
SKUH x W x DData SheetDrawing*.dwg
IP-SSL304020300 x 400 x 200PDFPDF.dwg
IP-SSL406020400 x 600 x 200PDFPDF.dwg
IP-SSL608030600 x 800 x 300PDFPDF.dwg

IP55 Stainless Steel Enclosures

The SS2 range consists of grade 316 stainless steel, double door, wall-mounted electrical enclosures designed for extreme duty applications.

Features & Specifications

Protection: Complies with IP55 IK10, NEMA 4x (Independent accredited test laboratory).

Standard: EN62208, EN60529, (UL 508A Optional).

Conforming and certified to EN62208 – ‘Empty enclosures for low voltage switch gear and control gear assemblies’.
(Complying to new standard EN61439 – 2016 ‘Low voltage switch gear and control gear assemblies’ as empty enclosure in accordance to EN62208.)

Material:

– Body: 1.5mm Grade 316/316L Stainless Steel
– Door: 1.5mm Grade 316/316L Stainless Steel
– Device Mounting Plate: 1.5mm Galvanised Steel Sheet
– Seal: Polyurethane

Surface Finish:

0.4 micron Ra surface brushed finish

Enclosure Body:

The robust monoblock body is 1.5mm Grade 316/316L Stainless Steel. Precision automated manufacturing equipment ensures accuracy and consistent high quality. Flat face sealing surfaces increase seal life. Pre-fitted blind nutserts for mounting brackets and accessories removes the need for drilling. This retains the integrity of the IP rating. Integral device plate mounts and M6 earth stud are included.

Enclosure Double Doors:

The surface mounted doors are 1.5mm Grade 316/316L Stainless Steel and incorporates concealed removable hinges with captive pins. The doors are designed to eliminate the central mullion to improve accessibility into the enclosure. Doors are designed for a 110° opening. Each door contains integral cable management rail studs and M6 earth studs. The cable management rails are removable to provide more space for control components.

Enclosure Seal:

A high quality full perimeter seal provide excellent sealing over a long life. It is machine applied Polyurethane foamed in place (FIP).

Lock:

A full range of locking solutions are available upon request. Standard locks are as follows:
– 3 point locking system with key-lock swing handle.

Device Mounting Plate:

The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard.

Incorporates many advanced features as standard inclusions

  • Fabricated using grade 316 stainless steel
  • Incorporates flat sealing face to improve seal life
  • Includes door cable rails
  • Includes ‘nutsert rivnuts’ for mounting brackets and accessories to retain IP rating
  • Includes mounting points for accessories including inner door escutcheons, rain hoods etc.

Large Stainless Steel Enclosure
Large Stainless Steel Enclosure Open

IP55 Stainless Steel Enclosure Sizes

Part NumberEnclosure Size (mm)DownloadDownloadDownload
SKUH x W x DData SheetDrawing*.dwg
IP-SS100100301000 x 1000 x 300PDFPDF.dwg
IP-SS100100401000 x 1000 x 400PDFPDF.dwg
IP-SS120100301200 x 1000 x 300PDFPDF.dwg
IP-SS120100401200 x 1000 x 400PDFPDF.dwg
IP-SS120120301200 x 1200 x 300PDFPDF.dwg
IP-SS120120401200 x 1200 x 400PDFPDF.dwg