Electrical Enclosures

Electrical Enclosures

Electrical enclosures are designed to house a variety of electrical switch and control equipment. The powdercoated galvanised steel range is suitable for internal and external installations. This range of electrical enclosures complies to IEC62208 and IEC/EN/AS60529 up to IP66 IK10 and NEMA 4 certified by an independent accredited test laboratory and are suitable for up to 1000 V AC at frequencies not exceeding 1000 Hz or 1500 V DC. This range of electrical enclosures incorporates many advanced design features as standard inclusions and have been chosen by many organisations as their standard electrical enclosure system. A full range of sizes are available. Select the size you require and download the full range of electrical enclosure data sheets and drawings. Complete the quote request form and one of our team will contact you to provide a price.

IP66 Electrical Enclosures

The S1 range of electrical enclosures are rated for protection up to IP66. This range is wall-mounted, powder-coated galvanised steel, single door construction suitable for heavy duty applications.

Features and Specifications

Protection: Complies with IP66 IK10, NEMA 4 (Independent accredited test laboratory).

Electrical Enclosure Standard: IEC62208, IEC60529, (UL508A Optional).

Conforming and certified to IEC/EN62208 ‘Empty enclosures for low voltage switch gear and control gear assemblies’.

Material:

– Body: 1.2mm galvanised steel sheet (up to 700x500x250) 1.5mm galvanised steel sheet (800x600x200 and above)
– Gland Plate: 1.5mm galvanised steel sheet
– Door: 1.5mm galvanised steel sheet
– Device Mounting Plate: 1.5mm galvanised steel sheet
– Seal: Polyurethane

Body:

The robust monoblock body is fabricated using galvanised steel sheet (1.2mm-1.5mm). Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth studs are provided. A galvanised steel gland plate is incorporated into the bottom face. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment ensures accuracy and consistent high quality.

Door:

The robust surface mounted door is fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The door is designed for a 110° opening. Each door contains cable management rails, an M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Two internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components.

Seal:

A high quality machine-applied full perimeter UL listed Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life. Temperature resistance -40°C to 80°C (160°C short term loading).

Lock:

Chrome 3mm double bit insert quarter turn lock with key. A full range of locking solutions are available upon request.

Device Mounting Plate:

The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard.

Gland Plate:

Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size.

Surface Treatment:

UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness. The standard electrical enclosure colour is RAL7035. A full range of other colour options are available upon request.

Incorporates many advanced features as standard inclusions

  • Fabricated using ‘galvanised’ steel sheet to prevent rust if powdercoating is damaged
  • Incorporates flat sealing face to improve seal life
  • Includes door cable rails
  • Includes ‘nutsert rivnuts’ for mounting brackets and accessories to retain IP rating
  • Includes mounting points for accessories including inner door escutcheons, rain hoods etc.

Quick Quote

9 + 7 =

Electrical Enclosure
IP66 Electrical Enclosure

IP66 Electrical Enclosure Sizes

Part NumberEnclosure Size (mm)DownloadDownloadDownload
SKUH x W x DData SheetDrawing*.dwg
IP-302015300 x 200 x 150PDFPDF.dwg
IP-303015300 x 300 x 150PDFPDF.dwg
IP-303020300 x 300 x 200PDFPDF.dwg
IP-403015400 x 300 x 150PDFPDF.dwg
IP-403020400 x 300 x 200PDFPDF.dwg
IP-404020400 x 400 x 200PDFPDF.dwg
IP-503015500 x 300 x 150PDFPDF.dwg
IP-503020500 x 300 x 200PDFPDF.dwg
IP-504020500 x 400 x 200PDFPDF.dwg
IP-504025500 x 400 x 250PDFPDF.dwg
IP-505020500 x 500 x 200PDFPDF.dwg
IP-505025500 x 500 x 250PDFPDF.dwg
IP-604020600 x 400 x 200PDFPDF.dwg
IP-604025600 x 400 x 250PDFPDF.dwg
IP-606020600 x 600 x 200PDFPDF.dwg
IP-606030600 x 600 x 300PDFPDF.dwg
IP-705020700 x 500 x 200PDFPDF.dwg
IP-705025700 x 500 x 250PDFPDF.dwg
IP-806020800 x 600 x 200PDFPDF.dwg
IP-806025800 x 600 x 250PDFPDF.dwg
IP-806030800 x 600 x 300PDFPDF.dwg
IP-808020800 x 800 x 200PDFPDF.dwg
IP-808030800 x 800 x 300PDFPDF.dwg
IP-808040800 x 800 x 400PDFPDF.dwg
IP-10060251000 x 600 x 250PDFPDF.dwg
IP-10060301000 x 600 x 300PDFPDF.dwg
IP-10080301000 x 800 x 300PDFPDF.dwg
IP-10080401000 x 800 x 400PDFPDF.dwg
IP-12060301200 x 600 x 300PDFPDF.dwg
IP-12080301200 x 800 x 300PDFPDF.dwg
IP-12080401200 x 800 x 400PDFPDF.dwg

IP66 Electrical Enclosure Sizes – Landscape Orientation

Part NumberEnclosure Size (mm)DownloadDownloadDownload
SKUH x W x DData SheetDrawing*.dwg
IP-L304015300 x 400 x 150PDFPDF.dwg
IP-L304020300 x 400 x 200PDFPDF.dwg
IP-L406020400 x 600 x 200PDFPDF.dwg
IP-L406030400 x 600 x 300PDFPDF.dwg
IP-L608030600 x 800 x 300PDFPDF.dwg

IP55 Electrical Enclosures

The S2 range of electrical enclosures are rated for protection up to IP55. This range is wall-mounted, powder-coated galvanised steel, double door construction suitable for heavy duty applications.

Features and Specifications

Protection: Complies with IP55 IK10, NEMA 4 (Independent accredited test laboratory).

Electrical Enclosure Standard: EN62208, EN60529, (UL508A Optional).

Conforming and certified to EN62208 ‘Empty enclosures for low voltage switch gear and control gear assemblies’.

Material:

– Body: 1.5mm galvanised steel sheet
– Gland Plate: 1.5mm galvanised steel sheet
– Door: 1.5mm galvanised steel sheet
– Device Mounting Plate: 1.5mm galvanised steel sheet
– Seal: Polyurethane

Finish:

Powder-coated RAL7035 (Other colours available upon request)

Body:

The robust monoblock body is fabricated using 1.5mm galvanised steel sheet. Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth studs are provided. Gland plates are incorporated into the bottom face. Cutting, pressing and full continuous seam welding using precision automated manufacturing equipment ensures accuracy and consistent high quality.

Enclosure Double Doors:

The robust surface mounted doors are fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The doors are designed to eliminate the central mullion to improve accessibility into the enclosure. The doors are designed for a 110° opening. Each door contains integral cable management rails, an M6 earth stud and a high quality machine-applied foamed in place (FIP) Polyurethane seal. Internal cable management rails can be removed to provide additional space for equipment, duct and door mounted control components.

Enclosure Seal:

A high quality machine-applied full perimeter UL listed Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life. Temperature resistance -40°C to 80°C (160°C short term loading).

Enclosure Lock:

3 point locking system with key-lock swing handle. A full range of locking solutions are available upon request.

Device Mounting Plate:

The device mounting plate is 1.5mm galvanised steel sheet. It is pressed to provide strength. It is pre-fitted into the enclosure as standard.

Gland Plate:

Gland plates are incorporated into the bottom face of the enclosure for cable management. They are provided with gaskets and fasteners. The size and quantity vary according to enclosure size.

Surface Treatment:

UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness. The standard electrical enclosure colour is RAL7035. A full range of other colour options are available upon request.

Incorporates many advanced features as standard inclusions

  • Fabricated using ‘galvanised’ steel sheet to prevent rust if powdercoating is damaged
  • Incorporates flat sealing face to improve seal life
  • Includes door cable rails
  • Includes ‘nutsert rivnuts’ for mounting brackets and accessories to retain IP rating
  • Includes mounting points for accessories including inner door escutcheons, rain hoods etc.

IP55 Electrical Enclosure
IP55 Electrical Enclosure
Electrical Enclosure Detail

IP55 Electrical Enclosure Sizes

Part NumberEnclosure Size (mm)DownloadDownloadDownload
SKUH x W x DData SheetDrawing*.dwg
IP-100100301000 x 1000 x 300PDFPDF.dwg
IP-100100401000 x 1000 x 400PDFPDF.dwg
IP-120100301200 x 1000 x 300PDFPDF.dwg
IP-120100401200 x 1000 x 400PDFPDF.dwg
IP-120120301200 x 1200 x 300PDFPDF.dwg
IP-120120401200 x 1200 x 400PDFPDF.dwg

IP55 Electrical Enclosure Sizes – Landscape Orientation

Part NumberEnclosure Size (mm)DownloadDownloadDownload
SKUH x W x DData SheetDrawing*.dwg
IP-L4010030400 x 1000 x 300PDFPDF.dwg
IP-L4010040400 x 1000 x 400PDFPDF.dwg
IP-L6010030600 x 1000 x 300PDFPDF.dwg
IP-L6010040600 x 1000 x 400PDFPDF.dwg
IP-L4012030400 x 1200 x 300PDFPDF.dwg
IP-L4012040400 x 1200 x 400PDFPDF.dwg
IP-L6012030600 x 1200 x 300PDFPDF.dwg
IP-L6012040600 x 1200 x 400PDFPDF.dwg